Plasma cleaning machine surface cleaning activation uniformity is improved

• Categories:Company Dynamics
• Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
• Origin:
• Time of issue:2021-01-19
• Views:

(Summary description)Plasma treatment of plastic surfaces can effectively pretreat surface activation before gluing, printing or painting. Similarly, ceramics, glass and other materials can also be treated by isoionization. Industrial oxygen is often used as a process gas for plasma treatment, hence the name: oxygen plasma. And the atmosphere is called atmospheric plasma. The effects may last only a few minutes or even months, depending on the type of material that needs to be treated with plasma. Plasma treatment is a surface modification technology which uses corona discharge to change the surface properties of materials. After corona treatment on the surface of the material/object, it will be guaranteed to bind to the printing ink, paint and binder. Its purpose is to optimize the bonding properties of polymer substrates. The low surface energy of polymer substrates usually results in poor adhesion of inks, glues and coatings, and the high surface energy of these materials. Corona treatment is widely used in plastic film, extrusion, automobile, medicine and other industries. In order to obtain adhesion, the surface energy of the matrix must be greater than or equal to the material surface energy of the polymer used. Surface energy of solid materials and requirements for polymer surface treatment. Plastic materials often need to be bonded to metal or other plastic materials, or simply printed on the plastic surface. For this to work, a liquid binder or ink must be used to wet the surface of the material. Corona treatment and plasma treatment are needed here. Lubricity depends on a special property of the surface: surface energy, often called surface tension. Surface energy: A unit of measurement of surface energy, like surface tension, expressed in mN/m. The surface energy of a solid substrate directly affects the wettability of the liquid on the surface. The wettability can be proved by measuring the contact Angle. The contact Angle is the Angle between the tangent line of the contact point and the horizontal plane of the solid surface. How to improve the uniformity of plasma cleaning machine: 1. Surface wettability; 2. The wettability of the surface can help us distinguish good and bad wettability; 3. With the increase of liquid surface tension, the surface energy of solid substrate increases, and the better its wettability is, the smaller the contact Angle is. 4. In order to form an appropriate combination of liquid and substrate surface, the substrate surface energy should be within the liquid tension range of about 2-10Mn /m; 5. When a droplet is installed on a smooth solid surface, the droplet will spread to the substrate. If it is completely wet, the contact Angle is almost zero. Conversely, if the wetting is local, the resulting contact Angle is balanced between 0 and 180 degrees.