Common faults and treatment of atmospheric plasma cleaning machine manufacturers

• Categories:Technical Support
• Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
• Origin:
• Time of issue:2021-01-15
• Views:

(Summary description)Atmospheric jet plasma cleaning machine has the advantages of high cleaning efficiency, modified etching to improve adhesion and other advantages, online production, environmental friendly and so on. In today's world, people is higher and higher requirement for the quality of products, cosmetics packaging industry, electronic industry, automobile industry, new energy industry and so on all need to use air jetting plasma cleaning machine to improve the quality of the products to reduce the defective rate, therefore, atmospheric jsog plasma cleaning machine the normal operation of the UPH for each factory (capacity) plays a decisive role. Once the atmospheric jet plasma cleaning machine fails, if it can not be eliminated in time, it will bring huge economic losses to enterprises. Atmospheric plasma cleaning machine and vacuum plasma cleaning machine, mechanical structure is relatively simple, in order to ensure production efficiency, the operator must have a certain ability to operate, the common troubleshooting methods are as follows: First, when the air jet plasma cleaning machine starts up, there is no plasma ejection can be divided into two situations: 1, the LCD panel does not display, the red LED indicator light is not bright: Countermeasures: Please check whether the power supply is normal and whether the power plug is in bad contact. 2, LCD display, red LED light flash (5 times per second); Countermeasures: A. Check whether the high-voltage wire falls off or is damaged, and replace it if it is damaged; B. If there is no problem with the high voltage wire, it may be the fault of the main board. Please contact the supplier to solve it as soon as possible. Two, the atmosphere jet type plasma cleaning machine after boot, instantly stop running for a period of time, red LED indicator light slowly flashing (1 times/second) : Action: Check the pressure of the pressure gauge is normal. If the pressure is too low or too high, adjust the pressure of the pressure gauge to this range. Check whether there is air leakage at the trachea connection and whether the trachea is damaged. If it is damaged, please replace the leaky joint with the damaged trachea. Three, atmospheric jet type plasma cleaning machine discharge inhomogeneity: 1. The sprinkler head should be replaced regularly: Atmospheric jet type plasma cleaning machine plasma is in the gas ionization by the nozzle spray, long time use will cause loss, will also make the nozzle internal carbonization phenomenon, and the serious loss of the nozzle will produce particles, affect the treatment effect of products, and then affect the quality of products. 2. Replace the inner electrode regularly: The inner electrode is consumable and should be checked frequently. If the loss depth is found to be around 2mm, it should be replaced. The discharge effect of atmospheric jet plasma cleaning machine will be seriously affected if the inner electrode is not replaced in time.