Today, Chengfeng Zhizao will analyze the precautions for the power supply of low-temperature plasma cleaning equipment

• Categories:Industry News
• Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
• Origin:
• Time of issue:2022-08-17
• Views:

(Summary description)         The following will tell you a few things that basically all types of low-temperature plasma cleaning equipment should pay attention to when using it. Now with the development of science and technology, there are more and more types of low-temperature plasma cleaning equipment. It is only necessary to understand the instructions for use. Some low-temperature plasma equipment also require operators to receive on-the-job training. With the development of science and technology, many low-temperature plasma equipment has begun to have a self-cleaning function, and the daily maintenance of the equipment has become more concise. In the experiment, when we want to clean, activate, corrode, deposit or polymerize the surfaces of various materials, low-temperature plasma processing equipment is a necessity, and as a high-precision equipment often used in laboratories, the price is naturally high. If Improper operation when using low-temperature plasma equipment is likely to cause damage to the equipment or affect the operation results, so today Chengfeng Zhizao will tell you about the precautions for the use of low-temperature plasma cleaning equipment. First, the low-temperature plasma cleaning equipment requires a power supply with a frequency of 220V AC and a frequency of 50HZ during operation. The connection and inspection of the power supply should be done before turning on the equipment. After the equipment is running, it should emit a smooth running sound. And usually, there will be a green indicator light on to show that the equipment is running normally. If the yellow fault light is on, stop the operation for scheduled inspection. Second, when using Chengfeng Zhizhi low temperature plasma cleaning equipment, special attention should be paid to the red warning light. Usually, the red light will be always on when there is a problem with the operation of the equipment or the jitter frequency is too fast. At this time, you should press the reset button immediately to observe If the equipment is still abnormal, the operation of the equipment should be stopped, and then the troubleshooting should be carried out to avoid damage to the equipment. Third, when using low-temperature plasma cleaning equipment, it should be cleaned regularly, and when cleaning, the power must be disconnected first, and then the vacuum chamber and electric control box must be opened, and attention should be paid to cleaning according to the specifications required in the manual. The vacuum chambers of many low-temperature plasma equipment are external toroidal electrodes, so it is not easy to cause contamination in the chamber. I hope the above explanation can help you, and you are welcome to inquire about this issue, and you can contact us if you need it.