Welcome to Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

E-mail:shaobo@sfi-crf.com

img
搜索
确认
取消
News Center

News Center

Professional plasma plasma high-tech enterprise dedicated to providing manufacturing equipment and process solutions for the electronics industry
News

How to deal with the equipment power alarm when the surface plasma treatment equipment is processing

  • Categories:Technical Support
  • Author:Plasma cleaning machine-CRF plasma plasma equipment-plasma surface treatment machine manufacturer-chengfeng intelligent manufacturing
  • Origin:
  • Time of issue:2021-08-21
  • Views:

(Summary description)How to deal with the equipment power alarm when the surface plasma treatment equipment is processing: Power supply alarms appear on low-pressure vacuum plasma surface treatment equipment. Generally, the power supply alarms can be divided into the following two situations: power supply alarms and power reflected power alarms. Don’t panic when power alarms occur when using the equipment. The processing methods are roughly The same, easier to grasp. The root of the alarm problem lies in the power supply, and the power supply of the plasma surface treatment equipment is not what we usually call the power supply. In theory, it is a plasma generator. The two main reasons for power supply alarms are excessive power supply deviation and deviation of reflected power from the power supply. What should I do if the above-mentioned power alarm information appears in a concentrated situation? This problem is also of concern to many equipment users. First, look at the alarm interface that displays the power alarm information on the display. In fact, the solution includes six small steps: 1. First check whether the parameters of the low-pressure vacuum plasma device have been reset to zero. If so, we will reset it to manual mode, and then perform a test to see if it can work normally. 2. After checking the equipment parameters, the next step is to check whether the plasma of the low-voltage vacuum plasma equipment and the coaxial cable of the counterpart, the plasma control line and other wiring are normal (use a multimeter to measure and check whether the connection is Loose). 3. Next, you need to check whether there is any deviation in the initial position of the capacitor from the plasma generator panel of the low-pressure vacuum plasma equipment. If there is any deviation, you need to reset it. The power supply brand is different and the adjustment method is slightly different. 4. Check whether the power supply of the low-voltage vacuum plasma device is set correctly, and check whether the capacitor of the matcher is normal. 5. Check whether the plasma generator settings, feedback and reflection signals of the low-pressure vacuum plasma equipment are normal. Use a multimeter to measure and check whether the terminals are tightly pressed. 6. After troubleshooting the power supply and distribution box failure, first run to see if it has returned to normal, and then set it to automatic mode. The above is how to deal with the power alarm of the power supply of plasma surface treatment equipment. If you want to learn more about the details of the product, or have questions about the use of the equipment, please click on the online customer service. Chengfeng Zhizao is waiting for your call!

How to deal with the equipment power alarm when the surface plasma treatment equipment is processing

(Summary description)How to deal with the equipment power alarm when the surface plasma treatment equipment is processing:
Power supply alarms appear on low-pressure vacuum plasma surface treatment equipment. Generally, the power supply alarms can be divided into the following two situations: power supply alarms and power reflected power alarms. Don’t panic when power alarms occur when using the equipment. The processing methods are roughly The same, easier to grasp. The root of the alarm problem lies in the power supply, and the power supply of the plasma surface treatment equipment is not what we usually call the power supply. In theory, it is a plasma generator. The two main reasons for power supply alarms are excessive power supply deviation and deviation of reflected power from the power supply.
What should I do if the above-mentioned power alarm information appears in a concentrated situation? This problem is also of concern to many equipment users. First, look at the alarm interface that displays the power alarm information on the display. In fact, the solution includes six small steps:
1. First check whether the parameters of the low-pressure vacuum plasma device have been reset to zero. If so, we will reset it to manual mode, and then perform a test to see if it can work normally.
2. After checking the equipment parameters, the next step is to check whether the plasma of the low-voltage vacuum plasma equipment and the coaxial cable of the counterpart, the plasma control line and other wiring are normal (use a multimeter to measure and check whether the connection is Loose).
3. Next, you need to check whether there is any deviation in the initial position of the capacitor from the plasma generator panel of the low-pressure vacuum plasma equipment. If there is any deviation, you need to reset it. The power supply brand is different and the adjustment method is slightly different.
4. Check whether the power supply of the low-voltage vacuum plasma device is set correctly, and check whether the capacitor of the matcher is normal.
5. Check whether the plasma generator settings, feedback and reflection signals of the low-pressure vacuum plasma equipment are normal. Use a multimeter to measure and check whether the terminals are tightly pressed.
6. After troubleshooting the power supply and distribution box failure, first run to see if it has returned to normal, and then set it to automatic mode.
The above is how to deal with the power alarm of the power supply of plasma surface treatment equipment. If you want to learn more about the details of the product, or have questions about the use of the equipment, please click on the online customer service. Chengfeng Zhizao is waiting for your call!

  • Categories:Technical Support
  • Author:Plasma cleaning machine-CRF plasma plasma equipment-plasma surface treatment machine manufacturer-chengfeng intelligent manufacturing
  • Origin:
  • Time of issue:2021-08-21 22:54
  • Views:
Information

How to deal with the equipment power alarm when the surface plasma treatment equipment is processing:
Power supply alarms appear on low-pressure vacuum plasma surface treatment equipment. Generally, the power supply alarms can be divided into the following two situations: power supply alarms and power reflected power alarms. Don’t panic when power alarms occur when using the equipment. The processing methods are roughly The same, easier to grasp. The root of the alarm problem lies in the power supply, and the power supply of the plasma surface treatment equipment is not what we usually call the power supply. In theory, it is a plasma generator. The two main reasons for power supply alarms are excessive power supply deviation and deviation of reflected power from the power supply.
What should I do if the above-mentioned power alarm information appears in a concentrated situation? This problem is also of concern to many equipment users. First, look at the alarm interface that displays the power alarm information on the display. In fact, the solution includes six small steps:

the surface plasma treatment equipment1. First check whether the parameters of the low-pressure vacuum plasma device have been reset to zero. If so, we will reset it to manual mode, and then perform a test to see if it can work normally.
2. After checking the equipment parameters, the next step is to check whether the plasma of the low-voltage vacuum plasma equipment and the coaxial cable of the counterpart, the plasma control line and other wiring are normal (use a multimeter to measure and check whether the connection is Loose).
3. Next, you need to check whether there is any deviation in the initial position of the capacitor from the plasma generator panel of the low-pressure vacuum plasma equipment. If there is any deviation, you need to reset it. The power supply brand is different and the adjustment method is slightly different.
4. Check whether the power supply of the low-voltage vacuum plasma device is set correctly, and check whether the capacitor of the matcher is normal.
5. Check whether the plasma generator settings, feedback and reflection signals of the low-pressure vacuum plasma equipment are normal. Use a multimeter to measure and check whether the terminals are tightly pressed.
6. After troubleshooting the power supply and distribution box failure, first run to see if it has returned to normal, and then set it to automatic mode.
The above is how to deal with the power alarm of the power supply of plasma surface treatment equipment. If you want to learn more about the details of the product, or have questions about the use of the equipment, please click on the online customer service. Chengfeng Zhizao is waiting for your call!

Keyword:

Scan the QR code to read on your phone

Relevant Information

Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

Adhere to quality as the foundation, honesty as the way of business, innovation as the source of development, and service as the pinnacle of value

©Shenzhen Sing Fung Intelligent Manufacturing Co., Ltd. All rights reserved
粤ICP备19006998号
dh

TEL:0755-3367 3020 / 0755-3367 3019

dh

E-mail:sales-sfi@sfi-crf.com

dh

ADD:Mabao Industrial Zone, Huangpu, Baoan District, Shenzhen