Welcome to Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

E-mail:shaobo@sfi-crf.com

img
搜索
确认
取消
News Center

News Center

Professional plasma plasma high-tech enterprise dedicated to providing manufacturing equipment and process solutions for the electronics industry
News

Five advantages of vacuum plasma surface treatment system in HDI board and FPC processing

  • Categories:Industry News
  • Author:Plasma cleaning machine-CRF plasma plasma equipment-plasma surface treatment machine manufacturer-chengfeng intelligent manufacturing
  • Origin:
  • Time of issue:2021-08-05
  • Views:

(Summary description)Five advantages of vacuum plasma surface treatment system in HDI board and FPC processing: In recent years, with the continuous advancement of science and technology, the requirements for PCB and FPC processing difficulty and quality have become higher and higher. Due to the emergence of new materials and new processes, vacuum plasma treatment systems and plasma surface treatment technologies have become broader Space for development. This article mainly introduces the application of vacuum plasma surface treatment system in HDI board, FPC and other fields. Vacuum plasma surface treatment system for HDI plates: HDI boards are smart phone motherboards. After laser drilling, carbides are usually formed in the micropores. The cleaning process of the vacuum plasma surface treatment system can remove the holes in the holes. Carbides, in addition, the etching and activation of the vacuum plasma surface treatment system can make the micro-holes more smooth, improve the reliability of the PTH process, increase the yield, and can significantly improve the gap between the copper plating layer and the copper material at the bottom of the hole. Stratified. FPC board processing plasma cleaning machine process introduction. The vacuum plasma surface treatment system can be used to remove the residual glue on the wall of the multi-layer soft board during the manufacturing process of the FPC board; the plasma surface treatment strengthens the material, such as steel sheet, aluminum sheet, FR-4, etc.; decomposition due to laser cutting Gold finger carbide; remove the dry film residue produced by the production of fine lines. 1. Removal of residual glue on the hole wall of the multilayer soft board: The vacuum plasma surface treatment system is used for cleaning treatment, which can completely remove the dirt in the hole, increase the bonding force between the hole wall and the copper plating layer, improve the reliability and yield of the hole plating, or PTH, and prevent the inner layer from opening and poor conduction. 2. Cleaning and activation of plasma surface strengthening materials: The use of steel plate reinforcement method can improve its bonding force. 3. Decomposition of carbide on the surface of the gold finger: The gold finger will produce a certain amount of carbide after laser cutting. Plasma surface cleaning technology can clean the gold finger and improve the reliability of the product. 4. Plasma cleaner to remove the film: In the thin wire manufacturing process, a certain amount of dry film residues are often generated, and plasma cleaning equipment is needed for processing and removal at this time. 5. Before electroless gold plating and electroplating, clean the surface of gold fingers, pads, etc.: After the surface of the gold fingers and pads are processed by the vacuum plasma surface treatment system, they can effectively remove surface particles and contaminants, improve their reliability during chemical gold deposition and electroplating, and improve product quality. Chengfeng Zhizao focuses on the R&D and manufacturing of plasma technology. If you want to have a more detailed understanding of the equipment or have questions about the use of the equipment, please click on the Chengfeng Zhizao online customer service. Chengfeng Zhizao is waiting for your call!

Five advantages of vacuum plasma surface treatment system in HDI board and FPC processing

(Summary description)Five advantages of vacuum plasma surface treatment system in HDI board and FPC processing:
In recent years, with the continuous advancement of science and technology, the requirements for PCB and FPC processing difficulty and quality have become higher and higher. Due to the emergence of new materials and new processes, vacuum plasma treatment systems and plasma surface treatment technologies have become broader Space for development. This article mainly introduces the application of vacuum plasma surface treatment system in HDI board, FPC and other fields.
Vacuum plasma surface treatment system for HDI plates: HDI boards are smart phone motherboards. After laser drilling, carbides are usually formed in the micropores. The cleaning process of the vacuum plasma surface treatment system can remove the holes in the holes. Carbides, in addition, the etching and activation of the vacuum plasma surface treatment system can make the micro-holes more smooth, improve the reliability of the PTH process, increase the yield, and can significantly improve the gap between the copper plating layer and the copper material at the bottom of the hole. Stratified.
FPC board processing plasma cleaning machine process introduction.
The vacuum plasma surface treatment system can be used to remove the residual glue on the wall of the multi-layer soft board during the manufacturing process of the FPC board; the plasma surface treatment strengthens the material, such as steel sheet, aluminum sheet, FR-4, etc.; decomposition due to laser cutting Gold finger carbide; remove the dry film residue produced by the production of fine lines.
1. Removal of residual glue on the hole wall of the multilayer soft board:
The vacuum plasma surface treatment system is used for cleaning treatment, which can completely remove the dirt in the hole, increase the bonding force between the hole wall and the copper plating layer, improve the reliability and yield of the hole plating, or PTH, and prevent the inner layer from opening and poor conduction.
2. Cleaning and activation of plasma surface strengthening materials:
The use of steel plate reinforcement method can improve its bonding force.
3. Decomposition of carbide on the surface of the gold finger:
The gold finger will produce a certain amount of carbide after laser cutting. Plasma surface cleaning technology can clean the gold finger and improve the reliability of the product.
4. Plasma cleaner to remove the film:
In the thin wire manufacturing process, a certain amount of dry film residues are often generated, and plasma cleaning equipment is needed for processing and removal at this time.
5. Before electroless gold plating and electroplating, clean the surface of gold fingers, pads, etc.:
After the surface of the gold fingers and pads are processed by the vacuum plasma surface treatment system, they can effectively remove surface particles and contaminants, improve their reliability during chemical gold deposition and electroplating, and improve product quality.
Chengfeng Zhizao focuses on the R&D and manufacturing of plasma technology. If you want to have a more detailed understanding of the equipment or have questions about the use of the equipment, please click on the Chengfeng Zhizao online customer service. Chengfeng Zhizao is waiting for your call!

  • Categories:Industry News
  • Author:Plasma cleaning machine-CRF plasma plasma equipment-plasma surface treatment machine manufacturer-chengfeng intelligent manufacturing
  • Origin:
  • Time of issue:2021-08-05 17:34
  • Views:
Information

Five advantages of vacuum plasma surface treatment system in HDI board and FPC processing:
In recent years, with the continuous advancement of science and technology, the requirements for PCB and FPC processing difficulty and quality have become higher and higher. Due to the emergence of new materials and new processes, vacuum plasma treatment systems and plasma surface treatment technologies have become broader Space for development. This article mainly introduces the application of vacuum plasma surface treatment system in HDI board, FPC and other fields.
Vacuum plasma surface treatment system for HDI plates: HDI boards are smart phone motherboards. After laser drilling, carbides are usually formed in the micropores. The cleaning process of the vacuum plasma surface treatment system can remove the holes in the holes. Carbides, in addition, the etching and activation of the vacuum plasma surface treatment system can make the micro-holes more smooth, improve the reliability of the PTH process, increase the yield, and can significantly improve the gap between the copper plating layer and the copper material at the bottom of the hole. Stratified.

plasma surface treatment systemFPC board processing plasma cleaning machine process introduction.
The vacuum plasma surface treatment system can be used to remove the residual glue on the wall of the multi-layer soft board during the manufacturing process of the FPC board; the plasma surface treatment strengthens the material, such as steel sheet, aluminum sheet, FR-4, etc.; decomposition due to laser cutting Gold finger carbide; remove the dry film residue produced by the production of fine lines.
1. Removal of residual glue on the hole wall of the multilayer soft board:
The vacuum plasma surface treatment system is used for cleaning treatment, which can completely remove the dirt in the hole, increase the bonding force between the hole wall and the copper plating layer, improve the reliability and yield of the hole plating, or PTH, and prevent the inner layer from opening and poor conduction.
2. Cleaning and activation of plasma surface strengthening materials:
The use of steel plate reinforcement method can improve its bonding force.
3. Decomposition of carbide on the surface of the gold finger:
The gold finger will produce a certain amount of carbide after laser cutting. Plasma surface cleaning technology can clean the gold finger and improve the reliability of the product.
4. Plasma cleaner to remove the film:
In the thin wire manufacturing process, a certain amount of dry film residues are often generated, and plasma cleaning equipment is needed for processing and removal at this time.
5. Before electroless gold plating and electroplating, clean the surface of gold fingers, pads, etc.:
After the surface of the gold fingers and pads are processed by the vacuum plasma surface treatment system, they can effectively remove surface particles and contaminants, improve their reliability during chemical gold deposition and electroplating, and improve product quality.
Chengfeng Zhizao focuses on the R&D and manufacturing of plasma technology. If you want to have a more detailed understanding of the equipment or have questions about the use of the equipment, please click on the Chengfeng Zhizao online customer service. Chengfeng Zhizao is waiting for your call!

Keyword:

Scan the QR code to read on your phone

Relevant Information

Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

Adhere to quality as the foundation, honesty as the way of business, innovation as the source of development, and service as the pinnacle of value

©Shenzhen Sing Fung Intelligent Manufacturing Co., Ltd. All rights reserved
粤ICP备19006998号
dh

TEL:0755-3367 3020 / 0755-3367 3019

dh

E-mail:sales-sfi@sfi-crf.com

dh

ADD:Mabao Industrial Zone, Huangpu, Baoan District, Shenzhen