Plasma cleaning machine picture Plasma cleaning machine equipment performance parameter description

• Categories:Technical Support
• Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
• Origin:
• Time of issue:2021-06-05
• Views:

(Summary description)Plasma cleaning machine picture Plasma cleaning machine equipment performance parameter description:         In various product applications, the process advantages of plasma cleaning machine cleaning are: increased production speed, no open flame in the operation process, safe and effective, stable and reliable process, simple and effective process monitoring. Plasma cleaning machine pictures         Description of the host structure and performance parameters of the plasma cleaning machine equipment:         1. The main unit of the plasma cleaning machine is powered off in the OFF state, while the main unit is powered in the ON state.         The pneumatic control valve is locked.         2. Pressure indication:         Display the current working pressure value.         3. Power display:         Display device, display device operating status, provide power supply voltage, power supply current, real-time power and cumulative power consumption.         4. Power adjustment:         Through the potentiometer knob, the user can adjust the power of the plasma cleaner to obtain the appropriate power. (Slight adjustment, do not use excessive force, so as not to damage the potentiometer)         5. High voltage port:         Connect the high-voltage wire of the spray gun, cut off the power supply during operation, unscrew the cover and black nut during installation, and tighten the high-voltage wire end by hand.         6. Ground wire:         Connect the ground wire of the spray gun, cut off the power supply during operation, unscrew the nut during installation, press the ground wire, and tighten it.         7. Drive power         Provide 24V driving voltage for the rotary spray gun, pay attention to the position of the plug slot when installing, and tighten the outer nut after inserting it.         8. Air outlet:         It is connected with the air pipe of the spray gun to provide kinetic energy for the sprayed plasma cleaning machine.         9. Air inlet:         Required gas source gas pressure range: ≥0.3MPa If the gas source pressure exceeds 1Mpa (10Kg), a pressure limiting valve must be installed externally (different products are treated differently). Nitrogen can be used if there are special technical requirements. Or other specific gas, if there is no compressed gas, or the pressure is lower than 0.05Mpa (0.5Kg), the plasma cleaning machine will automatically stop working and give an alarm. Note: The gas source must be oil-free and water-free.         10. Control:         The host is used to control the interface of the plasma equipment, the control line is twisted pair, and the passive connection must be used when connecting.         11. Power supply port:         220V/380V input power supply. Note: The supporting power supply must be single-phase three-wire, that is, the reliable connection of the ground wire must be ensured. (Other machinery and equipment shells cannot simply be used as ground wires. If there is no reliable grounding circuit, it may cause equipment damage or electric shock.)