Plasma cleaning machine operation should pay attention to matters

• Categories:Company Dynamics
• Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
• Origin:
• Time of issue:2020-08-04
• Views:

(Summary description)The Plasma Cleaner, also known as the Plasma Surface Treatment Instrument, is a high-tech technology that USES plasma to achieve results that conventional cleaning methods cannot achieve. A plasma is a state of matter, also known as the fourth state of matter. A gas becomes a plasma when enough energy is applied to separate it. The "active" components of plasma include: ions, electrons, active groups, excited nuclides (metastable state), photons, etc. Plasma cleaning machine is to use the properties of these active components to treat the sample surface, so as to achieve the purpose of cleaning. Plasma cleaning machine can be used for cleaning, etching, activation and surface preparation, etc. Three rf generators, including 40KHz, 13.56MHz and 2.45GHz, can be selected to meet the needs of different cleaning efficiency and cleaning effect. Like a solid, a liquid, or a gas, a plasma is a state of matter, also known as the fourth state of matter. A gas becomes a plasma when enough energy is applied to separate it. The "active" components of plasma include: ions, electrons, active groups, excited nuclides (metastable state), photons, etc. The plasma surface treatment instrument USES the properties of these active components to treat the surface of samples, so as to achieve the purpose of cleaning, modification, photoresist ashing and so on. So plasma cleaning machine in the operation should pay attention to what matters? 1. Set the operating parameters of the plasma equipment correctly and execute the operation instructions on time; 2. Protect the plasma ignition device to ensure that the plasma cleaning machine can start normally; 3. In the preparation of plasma equipment before starting, relevant personnel should be trained, and ensure that the personnel operating the plasma cleaning machine can strictly carry out all the operations as required; 4. When there is no ventilation in the primary air duct, the operating time of the plasma generator should not exceed the time required in the equipment manual, so as to avoid burning the burner and causing unnecessary losses; 5. If it is necessary to maintain the plasma equipment, please power off the plasma generator before the corresponding operation. Plasma treatment equipment is widely used in plasma cleaning, etching, plasma plating, plasma coating, plasma ashing and surface modification. Through its treatment, can improve the material surface wetting ability, so that a variety of materials can coating, plating and other operations, enhance the adhesion, bonding strength, while removing organic pollutants, oil or grease.