Welcome to Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

E-mail:shaobo@sfi-crf.com

img
搜索
确认
取消
News Center

News Center

Professional plasma plasma high-tech enterprise dedicated to providing manufacturing equipment and process solutions for the electronics industry
News

What is the hazardous safety distance of plasma surface processor equipment

  • Categories:Technical Support
  • Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
  • Origin:
  • Time of issue:2021-02-23
  • Views:

(Summary description)Glow plasma produced by plasma surface processor equipment, can be dealt with effectively remove the original material surface contaminants and impurities, and produce etching effect, make the surface rough, forming many small pits, increase the contact area and improve the surface wettability (as the saying goes, improve the adhesion of surface, increase the hydrophilic). Plasma surface processor equipment has a wide range of applications, it can solve the bonding, printing, spraying, electrostatic and other technical problems, to achieve the pursuit of modern manufacturing process of high quality, high reliability, high efficiency, low cost, environmental protection and other goals. Many factory operators, when using plasma surface processor equipment, always want to consult the manufacturer, plasma surface processor equipment dangerous safety distance is what?   Plasma surface processor devices produce trace amounts of ozone when they are turned on. Ozone is basically no harm to the human body, but also can effectively decompose harmful bacteria in the air, sterilization. But if the use of the environment is relatively closed, ventilation conditions are poor, it will be too high, so that people around smell irritant odor, produce a mild feeling of dizziness and headache. Therefore, the plasma machine production workshop needs to keep unblocked with the outside air. If the use space is relatively closed and the ventilation condition is poor, a special exhaust system needs to be installed.   Plasma surface processor devices produce a glow that burns the human body when in close contact. So when plasma beams process materials, they cannot be touched by hand. In general, the distance between the direct-injection plasma surface processor and the nozzle is 50mm, and the distance between the rotating plasma surface processor and the nozzle is 30mm (the distance is different for different types of equipment). In order to ensure the safe operation of the equipment, please use AC220V/380V power supply, and do a good job of grounding, to ensure that the air supply is dry and clean.

What is the hazardous safety distance of plasma surface processor equipment

(Summary description)Glow plasma produced by plasma surface processor equipment, can be dealt with effectively remove the original material surface contaminants and impurities, and produce etching effect, make the surface rough, forming many small pits, increase the contact area and improve the surface wettability (as the saying goes, improve the adhesion of surface, increase the hydrophilic). Plasma surface processor equipment has a wide range of applications, it can solve the bonding, printing, spraying, electrostatic and other technical problems, to achieve the pursuit of modern manufacturing process of high quality, high reliability, high efficiency, low cost, environmental protection and other goals.



Many factory operators, when using plasma surface processor equipment, always want to consult the manufacturer, plasma surface processor equipment dangerous safety distance is what?

 

Plasma surface processor devices produce trace amounts of ozone when they are turned on. Ozone is basically no harm to the human body, but also can effectively decompose harmful bacteria in the air, sterilization. But if the use of the environment is relatively closed, ventilation conditions are poor, it will be too high, so that people around smell irritant odor, produce a mild feeling of dizziness and headache. Therefore, the plasma machine production workshop needs to keep unblocked with the outside air. If the use space is relatively closed and the ventilation condition is poor, a special exhaust system needs to be installed.

 

Plasma surface processor devices produce a glow that burns the human body when in close contact. So when plasma beams process materials, they cannot be touched by hand. In general, the distance between the direct-injection plasma surface processor and the nozzle is 50mm, and the distance between the rotating plasma surface processor and the nozzle is 30mm (the distance is different for different types of equipment).


In order to ensure the safe operation of the equipment, please use AC220V/380V power supply, and do a good job of grounding, to ensure that the air supply is dry and clean.

  • Categories:Technical Support
  • Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
  • Origin:
  • Time of issue:2021-02-23 09:59
  • Views:
Information

What is the hazardous safety distance of plasma surface processor equipment:

Glow plasma produced by plasma surface processor equipment, can be dealt with effectively remove the original material surface contaminants and impurities, and produce etching effect, make the surface rough, forming many small pits, increase the contact area and improve the surface wettability (as the saying goes, improve the adhesion of surface, increase the hydrophilic). Plasma surface processor equipment has a wide range of applications, it can solve the bonding, printing, spraying, electrostatic and other technical problems, to achieve the pursuit of modern manufacturing process of high quality, high reliability, high efficiency, low cost, environmental protection and other goals.

CRF plasma surface processor equipment

Many factory operators, when using plasma surface processor equipment, always want to consult the manufacturer, plasma surface processor equipment dangerous safety distance is what?

 

Plasma surface processor devices produce trace amounts of ozone when they are turned on. Ozone is basically no harm to the human body, but also can effectively decompose harmful bacteria in the air, sterilization. But if the use of the environment is relatively closed, ventilation conditions are poor, it will be too high, so that people around smell irritant odor, produce a mild feeling of dizziness and headache. Therefore, the plasma machine production workshop needs to keep unblocked with the outside air. If the use space is relatively closed and the ventilation condition is poor, a special exhaust system needs to be installed.

 

Plasma surface processor devices produce a glow that burns the human body when in close contact. So when plasma beams process materials, they cannot be touched by hand. In general, the distance between the direct-injection plasma surface processor and the nozzle is 50mm, and the distance between the rotating plasma surface processor and the nozzle is 30mm (the distance is different for different types of equipment).


In order to ensure the safe operation of the equipment, please use AC220V/380V power supply, and do a good job of grounding, to ensure that the air supply is dry and clean.

Scan the QR code to read on your phone

Relevant Information

Shenzhen Sing Fung Intelligent  Manufacturing Co., Ltd.

Adhere to quality as the foundation, honesty as the way of business, innovation as the source of development, and service as the pinnacle of value

©Shenzhen Sing Fung Intelligent Manufacturing Co., Ltd. All rights reserved
粤ICP备19006998号
dh

TEL:0755-3367 3020 / 0755-3367 3019

dh

E-mail:sales-sfi@sfi-crf.com

dh

ADD:Mabao Industrial Zone, Huangpu, Baoan District, Shenzhen