Welcome to Shenzhen Sing Fung Intelligent Manufacturing Co., Ltd.
E-mail:shaobo@sfi-crf.com
Liquid crystal automatic terminal plasma cleaning machine to enhance surface adhesion
- Categories:Technical Support
- Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
- Origin:
- Time of issue:2021-01-22
- Views:
(Summary description)Liquid crystal terminal automatic plasma cleaning machine adopts low temperature plasma cold arc discharge technology. Cleaning efficiency is high and processing speed is fast. A variety of nozzles can be selected, available gases :N2, H2, CDA(air), etc. No preheating is required and can be started and stopped at any time. It can be operated online or offline, with low operating cost, no pollution, no static residual, no arc, small size, easy installation and maintenance. Liquid crystal automatic terminal plasma cleaning machine products can be applied to the industry In-cell, On-cell, OGS full fitting screen STN-LCD, TFT-LCD and so on. LCD automatic terminal plasma cleaning machine Plasma cleaning machine surface treatment process characteristics; 1. The plasma flow is neutral, no charge, can be used for surface treatment of various polymers, metals, rubber, liquid crystal terminals, printed circuit boards and other materials to improve the bonding ability; 2. Improve the bonding strength of plastic parts, such as PP material after treatment can be increased several times, most plastic parts after treatment can make the surface can reach more than 60 dynes; 3. After plasma treatment, the surface performance is durable and stable for a long time; 4. Dry treatment without pollution, no waste water, in line with environmental protection requirements; 5. The output temperature is moderate, which will not cause damage and deformation to the workpiece. 6. The processing width can be adjusted, whether it is processing narrow edges and small grooves or large areas can be processed. 7. Adopt special electrode material, which can reduce pollution and avoid secondary pollution of workpiece. 8. The power can be adjusted continuously, the nozzle structure can be adjusted according to the need, can adapt to different processing width. 9. Very low failure rate, avoid production stagnation, high stability. CRF team engaged in plasma equipment manufacturing for many years, has successfully developed a variety of plasma cleaning machine equipment. In order to meet the market demand, the equipment has good stability, self-inspection, fault alarm, small size, easy to carry and other advantages, has been widely used in cable, electronics, food, automotive, liquid crystal, chip semiconductor and other industries in the cleaning process.
Liquid crystal automatic terminal plasma cleaning machine to enhance surface adhesion
(Summary description)Liquid crystal terminal automatic plasma cleaning machine adopts low temperature plasma cold arc discharge technology. Cleaning efficiency is high and processing speed is fast. A variety of nozzles can be selected, available gases :N2, H2, CDA(air), etc. No preheating is required and can be started and stopped at any time. It can be operated online or offline, with low operating cost, no pollution, no static residual, no arc, small size, easy installation and maintenance. Liquid crystal automatic terminal plasma cleaning machine products can be applied to the industry In-cell, On-cell, OGS full fitting screen STN-LCD, TFT-LCD and so on.
LCD automatic terminal plasma cleaning machine
Plasma cleaning machine surface treatment process characteristics;
1. The plasma flow is neutral, no charge, can be used for surface treatment of various polymers, metals, rubber, liquid crystal terminals, printed circuit boards and other materials to improve the bonding ability;
2. Improve the bonding strength of plastic parts, such as PP material after treatment can be increased several times, most plastic parts after treatment can make the surface can reach more than 60 dynes;
3. After plasma treatment, the surface performance is durable and stable for a long time;
4. Dry treatment without pollution, no waste water, in line with environmental protection requirements;
5. The output temperature is moderate, which will not cause damage and deformation to the workpiece.
6. The processing width can be adjusted, whether it is processing narrow edges and small grooves or large areas can be processed.
7. Adopt special electrode material, which can reduce pollution and avoid secondary pollution of workpiece.
8. The power can be adjusted continuously, the nozzle structure can be adjusted according to the need, can adapt to different processing width.
9. Very low failure rate, avoid production stagnation, high stability.
CRF team engaged in plasma equipment manufacturing for many years, has successfully developed a variety of plasma cleaning machine equipment. In order to meet the market demand, the equipment has good stability, self-inspection, fault alarm, small size, easy to carry and other advantages, has been widely used in cable, electronics, food, automotive, liquid crystal, chip semiconductor and other industries in the cleaning process.
- Categories:Technical Support
- Author:plasma cleaning machine-surface treatment equipment-CRF plasma machine-Sing Fung Intelligent Manufacturing
- Origin:
- Time of issue:2021-01-22 10:12
- Views:
Liquid crystal automatic terminal plasma cleaning machine to enhance surface adhesion:
Liquid crystal terminal automatic plasma cleaning machine adopts low temperature plasma cold arc discharge technology. Cleaning efficiency is high and processing speed is fast. A variety of nozzles can be selected, available gases :N2, H2, CDA(air), etc. No preheating is required and can be started and stopped at any time. It can be operated online or offline, with low operating cost, no pollution, no static residual, no arc, small size, easy installation and maintenance. Liquid crystal automatic terminal plasma cleaning machine products can be applied to the industry In-cell, On-cell, OGS full fitting screen STN-LCD, TFT-LCD and so on.
LCD automatic terminal plasma cleaning machine
Plasma cleaning machine surface treatment process characteristics;
1. The plasma flow is neutral, no charge, can be used for surface treatment of various polymers, metals, rubber, liquid crystal terminals, printed circuit boards and other materials to improve the bonding ability;
2. Improve the bonding strength of plastic parts, such as PP material after treatment can be increased several times, most plastic parts after treatment can make the surface can reach more than 60 dynes;
3. After plasma treatment, the surface performance is durable and stable for a long time;
4. Dry treatment without pollution, no waste water, in line with environmental protection requirements;
5. The output temperature is moderate, which will not cause damage and deformation to the workpiece.
6. The processing width can be adjusted, whether it is processing narrow edges and small grooves or large areas can be processed.
7. Adopt special electrode material, which can reduce pollution and avoid secondary pollution of workpiece.
8. The power can be adjusted continuously, the nozzle structure can be adjusted according to the need, can adapt to different processing width.
9. Very low failure rate, avoid production stagnation, high stability.
CRF team engaged in plasma equipment manufacturing for many years, has successfully developed a variety of plasma cleaning machine equipment. In order to meet the market demand, the equipment has good stability, self-inspection, fault alarm, small size, easy to carry and other advantages, has been widely used in cable, electronics, food, automotive, liquid crystal, chip semiconductor and other industries in the cleaning process.
Scan the QR code to read on your phone
TEL:0755-3367 3020 / 0755-3367 3019
E-mail:sales-sfi@sfi-crf.com
ADD:Mabao Industrial Zone, Huangpu, Baoan District, Shenzhen